Select Button Modifiers; Transport Controls - PRESONUS FaderPort 8 Owner's Manual

7 Sonar (MCU)
7.3

Transport Controls

Select Button Modifiers

7.2.1
7.3 Transport Controls
Arm. Pressing the Arm button will allow you to arm track for recording by pressing
the corresponding track's Select button.
Arm All. Press Shift + Arm to arm the eight currently focused tracks for recording.
Solo and Mute Clear. These buttons will clear all solos or mutes in the currently
focused bank of channels.
1 2 3 4 5 6
1. Stop. Stops playback.
2. Loop. This button is unavailable in Sonar. Looping is controlled by
the Click button in the Session Navigator. See Section 7.4.
3. Play / Pause. Starts playback at the current playback-
cursor position. Press again to pause playback.
4. Rewind. Press once to regress playback by bar, second, frame, or base sample
rate depending on mode. Pressing and holding will rewind more quickly.
5. Fast Forward. Press once to advance playback by bar,
second, frame, or base sample rate depending on mode.
Pressing and holding will fast forward more quickly.
6. Record. Starts recording at the current playback-
cursor position for record-enabled tracks.
FaderPort™ 8
Owner's Manual
39