Select Button Editing Functions; Transport Controls - PRESONUS FaderPort 8 Owner's Manual

6 Cubase / Nuendo (MCU)
6.3

Transport Controls

Select Button Modifiers
6.2.1
6.2.2

Select Button Editing Functions

6.3 Transport Controls
Arm. Pressing the Arm button will allow you to arm track for recording by pressing its
Select button.
Arm All. Press Shift + Arm to arm the eight currently focused tracks for recording.
Solo and Mute Clear. These buttons will clear all solos or mutes in the currently
focused bank of channels.
Selecting a track will provide several powerful editing functions. Each
function is dependent on the which Fader Mode is active.
Track Mode
• Pan. While selected, the Pan/Parameter encoder will
control the pan position for that track.
Edit Plug-ins
• Inserts. When Edit Plug-ins mode is active, the inserted plug-ins for the
Selected channel will be displayed. See Section 6.6.1 for more information.
Sends
• Sends. When Sends mode is active, the aux sends for
the Selected channel will be displayed.
1 2 3 4 5 6
1. Stop. Stops playback. Press twice to Return to Zero.
2. Loop. Engages / disengages Looping.
3. Play / Pause. Starts playback at the current playback-
cursor position. Press again to pause playback.
4. Rewind. Press and hold to move the cursor backwards through the timeline.
Press the Rewind and Fast Forward buttons simultaneously to Return to Zero.
5. Fast Forward. Press and hold to move the cursor forwards through the timeline.
6. Record. Starts recording at the current playback-
cursor position for record-enabled tracks.
FaderPort™ 8
Owner's Manual
34