Safety And Care; Battery Installation - Extech Instruments BR80 User Manual

Safety and Care


Do not expose instrument (display) to moisture

Switch off the instrument when not in use

Remove the batteries when cleaning the instrument

Replace all of the batteries at the same time

Do not immerse the camera in water

Store in a dry place

Only the camera head and the flex tube are water resistant
Warning
Permanent damage to the flex tube and loss of operation will occur if the flex tube is subjected
to narrow radius or sharp angle bends.

Battery Installation

1. Open the battery compartment by sliding the latch at the bottom of the
instrument's handle
2. Insert four new 'AA' 1.5V batteries into the proper slots in the battery
compartment. Proper battery orientation is indicated on the battery
compartment.
3. Close the battery compartment.
Note: Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel Cadmium) batteries.
All EU users are legally bound by the battery ordinance to return all used
batteries to collection points in your community or wherever batteries /
accumulators are sold! Disposal in the household garbage is prohibited!
actoolsupply.com
3
actoolsupply.com
BR80-EU-EN-V1.0 10/11