Important Notes - Siemens Synco700 RMK770 Documentation Handbook

Field of use
Correct use
Electrical installation
Commissioning
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal
14/226
Building Technologies
HVAC Products
1.5

Important notes

This symbol shall draw your attention to special safety notes and warnings. If such
notes are not observed, personal injury and / or considerable damage to property can
occur.
Synco™ 700 products may only be used for the control and supervision of heating,
ventilation, air conditioning and chilled water plant.
Prerequisites for flawless and safe operation of Synco™ products are proper transport,
installation and commissioning, as well as correct operation.
Fuses, switches, wiring and earthing must be in compliance with local safety regula-
tions for electrical installations.
Preparation for use and commissioning of Synco™ products must be undertaken by
qualified staff who have been appropriately trained by Siemens Building Technologies.
Synco™ 700 products may only be operated by staff who have been instructed by
Siemens Building Technologies or their delegates and whose attention has been drawn
to potential risks.
When wiring the system, the AC 230 V section must be strictly segregated from the
AC 24 V safety extra low-voltage (SELV) section in order to ensure protection against
electric shock hazard!
For storage and transport, the limits given in the relevant Data Sheets must always be
observed.
If in doubt, contact your supplier or Siemens Building Technologies.
Synco™ 700 products are maintenance-free, apart from cleaning at regular intervals.
System sections accommodated in the control panel should be freed from dust and dirt
whenever normal service visits are due.
Should system faults occur and you are not authorized to make diagnostics and to
rectify faults, call Siemens Building Technologies service staff.
Only authorized staff are permitted to perform diagnostics, to rectify faults and to restart
the plant. This also applies to work carried out within the control panel (e.g. safety
checks or changing fuses).
• The products contain electrical and electronic components and must not be disposed
of together with domestic waste
• Local and currently valid legislation must be observed
Boiler Sequence Controller RMK770
1 Summary
CE1P3132en
01.03.2005