Change The Position Of A Picture-In-Picture On The Screen - Cisco TelePresence SX10 User Manual

25 Camera

Change the Position of a Picture-in-Picture on the Screen

With self-view activated (see previous page) or a layout
involving a picture-in-picture, navigate to Layout (
the upper right corner and press OK. The Layout icon
will appear only when relevant.
The self-view image will now turn blue to show that it has
been selected. Click OK.
Use Arrow keys to move the image. Press OK when
finished.
The layout menu appears. Press Arrow-down to
navigate to the self-view image.
) in
Arrows will now appear to indicate that the self-view
image can be moved. Possible new locations are
indicated.
The image will now assume its original size.
Moving a PiP
As long as self-view (what others
see of you) is not shown full size,
it is shown as a PiP (picture-in-
picture).
You may also set up a layout
showing the other party as a PiP
when content is shared. However,
in this case we use self-view as
example.
You may want to have self-view
activated during a presentation
to ensure that you always remain
visible to the others.
During presentations you may
experience that the PiP blocks
important parts of the shared
content on your screen. This is why
your system allows you to move the
PiP.
Note that this will not affect how you
appear to the other participants. This
is a setup affecting your screen only.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.