Place Call From Contact List - Cisco TelePresence SX10 User Manual

7 Place Call

Place Call From Contact List

Make sure Call is selected and
press OK or press the green
Call button on the remote
control.
Press the green Call button or
press OK to place the call.
Use the Cursor keys to go
between Favorites, Recents and
Directory and then down in one
of the lists.
Press the red End Call button on
the remote control, or use the
Cursor keys to select End and
press OK to terminate the call.
Once an entry has been
located, press OK to invoke
the Call menu.
About the Lists of
Contacts
Your lists of Contacts consist of
three parts:
Favorites. These contacts have
put there by you. These entries
will typically be someone you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time.
Directory will typically be a corporate
directory installed on your system by
your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
The following options apply:
•
You may key in a name, number or
an IP address and the system will
look in all lists for you.
•
You may tap a tab and then scroll
through the list or key in a name or
number. Your search will then be
restricted to that specific list.
•
You may add the entry to the list of
Favorites; edit aspects of the entry
before calling and/or change the
call rate (the bandwidth applied to
the call).
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.