Far End Camera Control - Cisco TelePresence SX10 User Manual

26 Camera

Far end Camera Control

Navigate to Participants
participants will then appear.
To control the far end camera navigate to Camera and
click OK.
and press OK. A list of the
Select the participant, whose camera you want to control
and press OK. If you select Drop and press OK, you will
exit the camera control menu.
Adjust Pan, Tilt and Zoom as per your liking. Use OK or
Back to exit.
About Far End Camera
Control
Many video systems have a remotely
controllable camera. Such systems
allow you to use a remote control to
change pan, tilt, and zoom.
If the far end (those you are in a
meeting with) have such a system,
you may control their camera during
the call.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.