Start And Stop Presentation - Cisco TelePresence SX10 User Manual

17 Share Content

Start and Stop Presentation

Make sure your presentation source is connected and
On. Select Share and press OK on the remote control.
The size of the shared image is controlled by means of
the Minimize/Maximize field. Select this and press OK on
the remote control, if needed.
Select the source to be shared and press OK on the
remote control.
To stop sharing content, select Stop sharing and press
OK on the remote control.
About Content Sharing
Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.