Start And Stop Presentation In A Call - Cisco TelePresence DX70 User Manual

20
Share content

Start and Stop Presentation in a Call

In a call, connect your source and make sure
it is switched on. Tap Show PC to display the
screen of your PC locally on your DX70/80.
What you see on the screen when you do this
is not shown to the other participants.
The content of your PC screen will now
be shared with the other participants.
If you do not want to share your PC screen
with the others tap Hide PC to return to the
previous state. Otherwise, tap Share, as
shown to proceed to sharing content.
To stop sharing, tap Stop sharing, as shown.
About Content Sharing
Your video system supports the
ability to show presentations in a
video call or video conference .
Note that you may change the layout
of the screen during presentations,
see the next page for more on this.
Tip Your system camera can work
as a document camera. Just tilt it,
as shown, to present a document or
any other physical object that lies on
your table in front of the system.
The camera senses what you do to
it and automatically flips the image
vertically. Thus, the image appears
as expected to the far end.
D1510413 User Guide
Cisco TelePresence DX70, DX80
Produced: April 2016 for CE8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.