INSTRUCTION MANUAL
On receiving the Centac compressor, be sure to inspect
the unit for evidence of damage during shipment.
Immediately notify the carrier and the nearest
Ingersoll-Rand representative if any damage is noted.
The compressor should be stored on a level floor or
supports, in a dry protected area. Based on these
conditions, the Centac compressor has been prepared for
180 days of storage. If the unit is to be stored for periods
longer then 180 days, it will require additional protection.
Not to be used for breathing air application. Ingersoll-Rand
company air compressors are not designed, intended or approved
for breathing air applications. Ingersoll-Rand does not approve
specialized equipment for breathing air applications and assumes
no responsibility or liability for compressors used for breathing air
service.
NOTICE
WARNING
2000 Ingersoll-Rand Company
Date of Issue: December, 2003
Centac Instruction Manual