Standard Condensate Trap And Drain Arrangement - Ingersoll-Rand CENTAC Instruction Manual

SECTION 1 PLANNING & INSTALLATION
If the unit is unattended or in a location where maintenance is minimal, a high-level
condensate and shut down alarm should be used. If the traps become clogged, water carry-
over in the unit will result.
Drain trough
To floor drain
Compressor stage (Typ)
Pressure
Balance line
Float
Valve
Air gap
Figure 1.10

Standard Condensate Trap and Drain Arrangement

Condensate drain
Trap bypass valve
Centac Instruction Manual
 2000 Ingersoll-Rand Company
Date of Issue: December, 2003