Verify The Version; Complete Installation - Yamaha PSR-1500 Service Manual

PSR-1500/PSR-3000
4
Finish the installations, then it shows the following message on LCD.
Success:
5
Turn off the power supply of the instrument.
Please refer to the error message table (page 73) if it will show an error message on LCD.
3

Verify the version

1
Turn on the power supply of the instrument with pressing the [DIRECT ACCESS] switch simultaneously.
2
Version display mode starts.
3
Check that the version of Main Program on LCD is in agreement with the version of install data.
4
Check that all items are set to OK.
The version display on LCD.
PSR-1500
Version Overview
Model Name
Main Boot
Main Program
BitMap
LCD Patch
Contents1
Contents2
Font
Wnn
Wave
Press [EXIT] to quit.
5
If it checks that it is satisfactory, turn off the power supply of the instrument.
4

Complete installation

The program installation is completion above.
Please refer to the trouble shootings (page 73) if an error will occur during installations.
72
: PSR-1500 (E)
: 1.00
: 1.04 OK
: 1.00 OK
: 1.00 OK
: 1.00 OK
: 1.00 OK
: 1.00 OK
: 1.00 OK
: 1.00 OK
Failure:
PSR-3000
Version Overview
Model Name : PSR-3000 (E)
Main Boot : 1.00
Sub Boot : 1.01
Main Program : 1.04
Sub Program : 1.00
BitMap : 1.00
LCD Patch : 1.00
Contents1 : 1.00
Contents2 : 1.00
Font : 1.00
Wnn : 1.00
Wave : 1.00
Press [EXIT] to quit.
OK
OK
OK
OK
OK
OK
OK
OK
OK