Table of Contents
Advertisement
Trouble Shootings
Turned off the instrument while installing. Pulling off the SmartMedia card while installing.
Please retry to install.
No information on LCD with booting install mode.
The Flash ROM may be broken.
You need to exchange the Flash ROM device on board.
To avoid this, please don't turn the instrument off while installing.
Can't execute installation using the SmartMedia which was copied by the PC.
Please check the format of the SmartMedia card.
The instrument does not support SmartMedia cards formatted in FAT32.
Please re-format the SmartMedia card in FAT format, and retry installation.
An error message is displayed on LCD.
Please refer to the following table.
error message
Card error!
Install data does not exist!
Install error!
E001
E002
E003
E004
(Details)
E005
E006
E007
E008
note
Cannot load the installation data from
the smartmedia.
Cannot recognize the smartmedia, or
not exist the installation data into the
smartmedia.
Fail to install the data.
The boot data may be incorrect.
The data size is too large.
Check sum error (Reading from the
smartmedia) .
An error occured during to erase data.
Cannot write data to the Flash ROM at the
assigned address.
An error occured during to write data to
the Flash ROM.
An error occured during to verify data into
the Flash ROM.
Check sum error (Writing to the Flash
ROM) .
PSR-1500/PSR-3000
to do
Please check the smartmedia if it will have
been inserted exactly.
Please check the smartmedia if it will stick
the dust to the face of metal.
Please check the smartmedia if it will have
been inserted exactly.
Please check the data into the smartmedia
using the PC.
Please check the data correctly into the
smartmedia.
Please retry to install the data.
Please try to use the another smartmedia.
73
Hide quick links:
Advertisement
Table of Contents
