Starting The Moxf6/Moxf8 Editor; Version) - Yamaha MOXF6 Owner's Manual

Starting the MOXF6/MOXF8 Editor (VST version)
Install the Yamaha Steinberg USB Driver and MOXF6/MOXF8 Editor VST by following the respective
Installation Guides. After making the required connection and setting the MIDI IN/OUT parameter to "USB" in
the Utility mode, follow the instructions below to start the MOXF6/MOXF8 Editor VST.
This example describes the operation steps for Cubase with the MOXF6/MOXF8 instrument connected to a
computer via an USB cable.
n
For details about connection between the MOXF6/MOXF8 and a computer, refer to the Owner's Manual of the MOXF6/
MOXF8.
n
On the MOXF6/MOXF8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4]
OTHER. On this display, set the MIDI In/Out parameter to "USB", then press the [STORE] button to store this Utility
setting.
1.
Open the VST Instrument window via [Devices]  [VST Instruments] in the Cubase
series menu.
2.
Click the Instrument Slot in the VST Instrument Rack, then select [External]  [MOXF6/
MOXF8 VST].
3.
When the dialog box asking "Do you want to create a MIDI track assigned to plug-in
"MOXF6/MOXF8 VST"?" appears, click [Create].
A MIDI track will be created and the MOXF6/MOXF8 Editor VST window will appear.
MOXF6/MOXF8 Editor Owner's Manual
Starting the MOXF6/MOXF8 Editor (VST version)
4