Controlling Via The Control Menu - ABB RELION 620 Series Operation Manual

1MAC456939-IB D
6.2.2
620 series ANSI
Operation Manual
The control position of the protection relay affects the controlling SLD
buttons. Depending on the parameter settings, the protection relay may
have to be in local state for the control to succeed.

Controlling via the control menu

The primary equipment can be controlled via the LHMI with the Open and Close buttons
when the protection relay is set to the local-control mode and accessing the control
operations is authorized.
1.
Press to open or
•
If there are several controllable objects, select the object with
press to confirm the selection.
GUID-B44E0D8C-22B9-4BA4-8BE7-2C4EE9AA85F7 V1 EN
Figure 65:
2.
To confirm the operation, select Yes and press
to close the object.
Selecting a controlled object
Section 6
Operating procedures
and
.
and
91