Place Call From Contact List - Cisco SX10 User Manual

9
Place Call

Place Call From Contact List

Make sure Call is selected (the leftmost icon along the
bottom of the screen) and press OK on the remote
control or press the green Call button on the remote
control.
Once an entry has been located, press OK on the remote
control to invoke the Call menu.
Press the red End Call button on the remote control, or
use the Cursor keys to select End on the screen and
then press OK to terminate the call.
The Contact list appears. Use the horizontal Cursor keys
on the remote control to go between Favorites, Recents
and Directory (horizontally) and then down in one of the
lists.
Then press OK or the green Call button on the remote
control to place the call.
About the Contacts List
Your Contacts list consists of three
parts:
Favorites. These contacts have
put there by you. These entries
will typically be someone you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time.
Directory will typically be a corporate
directory installed on your system by
your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
The following options apply:
•
You may key in a name, number or
an IP address and the system will
look in all lists for you.
•
You may tap a tab and then scroll
through the list or key in a name or
number. Your search will then be
restricted to that specific list.
•
You may add the entry to the list of
Favorites; edit aspects of the entry
before calling and/or change the
call rate (the bandwidth applied to
the call).
D1509707 User Guide
Cisco TelePresence TRC 6
Produced: April 2016 for CE 8. 1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.