Tour The Screen - Cisco SX10 User Manual

5
Introduction to Video Conferencing

Tour the Screen

Upper left corner of the screen contains
the Settings icon which provides access to
Standby mode, System information and the
Do Not Disturb feature.
When set to Do Not Disturb, ringtones are muted and call attempts made by others to reach you will appear as
missed calls. You may, however, place calls as much as you like.
As default, there is a 60 minutes timeout on the Do not disturb (after which the system will return to normal
operation), but this may have been changed to a different setting by your Video Support Team.
An icon will appear to the right of
the Settings button if Proximity has
been enabled for this system.
The Call icon The Share Content
located to the left in icon is located to
the lower part of the the right in the
display. lower part of the
display.
The Camera Control menu icon is located in
the upper right corner of the display.
Operating tips
Use the Cursor controls the remote
control to move about the screen
and press OK/Enter to open the
selected menu field.
Use the Cancel key to exit a menu
(and return to the Home screen)
undoing any changes. Use the Back
key to go just one step back.
The remote control buttons are
described on the following pages.
D1509707 User Guide
Cisco TelePresence TRC 6
Produced: April 2016 for CE 8. 1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.