Place Call From Contact List; About The Contacts List - Cisco TelePresence SX10 User Manual

Video Calls

Place Call From Contact List

1
Make sure Call is selected (the leftmost
icon along the bottom of the screen) and
press OK on the remote control or press
the green Call button on the remote control.
4
Then press OK or the green Call button on
the remote control to place the call.
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
The Contact list appears. Use the Cursor keys
on the remote control to navigate between
Favorites, Recents and Directory (horizontally)
and then down in one of the lists.
5
Press the red End Call button on the
remote control, or use the Cursor keys to
select End on the screen and then press
OK to terminate the call.
3
Once an entry has been located, press OK
on the remote control to invoke the Call
menu.

About the Contacts List

Your Contacts list consists of three
parts:
Favorites. These contacts have
been put there by you. These
entries will typically be someone
you call frequently or otherwise
need to access in a swift and
convenient manner from time to
time.
Directory will typically be a
corporate directory installed on your
system by your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
The following options apply:
You may key in a name, number or
•
an IP address and the system will
look in all lists for you.
You may tap a tab and then scroll
•
through the list or key in a name or
number. Your search will then be
restricted to that specific list.
You may add the entry to the list of
•
Favorites; edit aspects of the entry
before calling and/or change the
call rate (the bandwidth applied to
the call).
9