Place Call From Contact List - Cisco TelePresenceSX10 User Manual

7 Place Call

Place Call From Contact List

Make sure Call is selected and
press OK or the green Call
button on the remote control.
Press the green Call button or
press OK to place the call.
Use the Cursor keys to go
between Favorites, Recents and
Directory and then down in one
of the lists.
Press the red End Call button on
the remote control, or use the
Cursor keys to select End and
press OK to terminate the call.
Once an entry has been
located, press OK to invoke
the Call menu.
About the Lists of
Contacts
Your lists of Contacts consist of
three parts:
Favorites. These contacts have
been put there by you. These entries
will typically be someone you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time.
Directory will typically be a corporate
directory installed on your system by
your video support team.
Recents is a list of calls you have
placed, received or missed earlier.
The following options apply:
•
You may key in a name, number
or an IP (video) address and the
system will look in all lists for you.
•
You may add the entry to the list of
Favorites; edit aspects of the entry
before calling; change the call
rate and remove the entry from
Recents,.
D1509704 User Guide
Cisco TelePresence SX10
Produced: December 2014 for TC7.3
All contents © 2014
Cisco Systems, Inc. All rights reserved.