Table of Contents
Advertisement
Video Calls
Place a Call From the Contact List
1
Make sure Call is selected (the leftmost icon
along the bottom of the screen) and press
OK on the remote control or press the
green Call button on the remote control.
4
In the Call menu, press OK or the green
Call button on the remote control to place
the call.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
The Contact list appears. Use the Cursor keys
on the remote control to navigate between
Favorites, Recents and Directory (horizontally)
and then down in one of the lists.
5
Press the red End Call button on the
remote control, or use the Cursor keys
to select End Call on the screen and then
press OK to terminate the call.
3
Once an entry has been located, press OK
on the remote control to invoke the Call
menu.
About List of Contacts
Your list of Contacts consists of
three parts:
Favorites. These contacts have
been added by you. These
entries are typically those you call
frequently or otherwise need to
access in a swift and convenient
manner from time to time. A favorite
is denoted by a golden asterisk
Directory is typically a corporate
directory installed on your device by
your video support team.
Recents is a list of calls you have
placed, received, or missed earlier.
The following options apply:
You can key in a name, number, or
•
an IP address and the device looks
in all lists for you.
You can select a tab and then scroll
•
through the list or key in a name
or number. Your search is then
restricted to that specific list.
You can add the entry to the list of
•
Favorites; edit aspects of the entry
before calling and/or change the
call rate (the bandwidth applied to
the call).
8
Advertisement
Table of Contents
