Description Ofiec 61010 Measurement Categories - Tektronix DMM4040 Safety And Installation Instructions Manual

I
•
DMM4040 and 4050
Safety and Installation Instructions
Description of IEC 61010 Measurement Categories
The lEC 61010 safety standard defines four Overvoltage (Insta llation) Categories (CAT I
to CAT IV) based on the magnitude of danger from transient impulses as shown in Figure
1.
CAT I
Electronic
CAT II CAT III
Appliances,
I
MC Panels, etc .
PCs, TVs
Service
Enlrance
Service
Enlra nce
CAT IV
- - - - - - 1
Meier
Underground Service
I
OUlbuilding
Transformer Oulbuilding
Meier
Underground Service
I
•
•
caUtJwhs.c ps
Figure 1. IEC 61010 Measurement Category (CAT) Levels
The lEC 61010 Measurement CAT level indicates the level of protection the instrument
provides against impulse withstand voltage.
CAT I equipment is designed to protect against transients from high-voltage, low-energy
sources, such as electronic circuits or a copy machine.
CAT II equipment is designed to protect against transients from energy-consuming
equipment supplied from the fixed installation, such as TVs, PCs, portable tools, and
other household appliances.
CAT III equipment is designed to protect against transients in equipment in fixed
equipment installations, such as distribution panels, feeders and short branch circuits, and
lighting systems in large buildings.
CAT IV equipment is designed to protect against transients from the primary supply
level, such as an electricity meter or an overhead or underground utility service.
~
•
•
a
6