Changing Presettings With A Hand-Held Unit - ergoline opensun550 Operating Instructions Manual

Changing presettings with a hand-held unit

Some data can also be displayed and changed with a commercially avai-
lable hand-held unit (e.g. from Palm). For this purpose you require spe-
cial software (available in German and English). Please call 1-866-243-
9861 for more details.
Caution!
The code for access via the infrared interface is preset in the
software of the hand-held unit, and can therefore be used with
any unit. Anyone, who downloads the software from the Inter-
net can access the unit date with a hand-held unit. Please no-
te that Customer Service changes the preset access code du-
ring initial start-up – see software operating manual. Please
note the new code for future use!
This code is independent of the access code for the preset-
tings via the control panel.
Note:
Please read the operating manual for the Ergoline software
for instructions on how to display or change data with a hand-
held unit.
Information on operating the hand-held unit is contained in the manufac-
turer's documentation.
75