Philips HDRW 720/17 Owner's Manual page 71

This section describes how you can make additional personal settings.
The symbols have the following meaning:
•) Switch on the TV set, and if necessary, select the channel for the DVD
recorder (channel 3 or 4).
•) Switch on the DVD recorder.
1 Press the DISC MENU button and then the SYSTEM
MENU button on the remote control.
P
The menubar appears.
2 Select '
' using D oder C and confirm with
3 Select the corresponding function using B or A and confirm
with C .
4 Select the corresponding line using B or A and confirm with
C . For more information on each function, read the following
pages.
5 Select the corresponding function using B or A , or the setting
with D or C . Select the functions you want to change as
described in the following pages.
6 Confirm the new setting with OK .
7 Close the menu item with D .
You can select the following functions in this menu:
The picture signal from your DVD recorder can be set to match your
TV set:
for a widescreen picture with black bars at the top and
bottom
' '
for a full-height picture with the sides trimmed.
' '
for a widescreen TV set (16:9 screen ratio)
Adapts the color dynamics for NTSC playback when switched to '
Use this feature to adjust the position of the picture on your TV left or
right using D , C to suit the screen of your TV set.
This allows you to switch the Component Video signal between
'Interlaced' and 'Progressive Scan.'
If your TV has separate connections for 'Interlaced' and
'Progressive Scan' or it does not switch automatically between the two,
it is possible that no picture will appear on the TV after it is switched
from one to the other.
1 Select the setting you need with SELECT . Choose Progressive
Scan only if your TV has Progressive Scan.
2 Confirm with OK .
a
ï
'