Philips HDRW 720/17 Owner's Manual page 43

Thanks to this programming system, you no longer need to tediously
enter the date, TV channel, start and finish time. All the information
needed by the DVD recorder for programming is contained in the
PlusCode programming number. This 9-digit PlusCode number is found
in most TV listings magazine.
'Programming with the VCR Plus+
Screen ™ data (empty '
1 Switch on the TV set. Select the channel on the DVD recorder (3
or 4).
2 Press TIMER s on the remote control.
P
The current data will appear.
a
b
3 Select '
' using B .
4 Enter the entire PlusCode number. This number is up to 8 digits
long and can be found next to the start time of the TV program in
your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode number.
If you make a mistake, press A . Select line '
B .
5 Confirm with OK .
® system' without TV Guide On
' screen) is not possible.
' using
a
b
P
The decoded data appears after confirmation.
B A
OK
OK
1 If all information is correct, press the OK button. The data is
stored.
2 To end, press TV GUIDE .
If one or more recordings have been programmed '
on the display.
A B
0..9
' will light up