Philips HDRW 720/17 Owner's Manual page 40

Recordings from the actual on the DVD-Recroder selected TV channel
are always started and recorded in the time shift buffer as soon as you
switch on the device. To store recordings on the HDD, choose from
the following:
Start the recording from the begin of the TV-show (Start is
known from the TV Guide On Screen
the TV program)
Press REC/OTR n .
Start the recording from the actual position (from now)
Hold REC/OTR n pressed, until the red light around the
n button on the front is switched on.
Stop the recording automatically:
If the start of the TV show is known from the TV Guide On
™
Screen System
The recording will stop at the end of the TV-Show.
Stop the recording manually:
Hold the red button on the remote control pressed, until the
red light around the n button on the front is switched off.
- You can mark a recording for storage on the HDD using
REC/OTR n on the remote control or n on the device. Such
marked recordings are displayed as a red bar in the time shift
buffer and are not automatically deleted after the time shift buffer
period (1 to 6 hours) expires.
- If you switch off the DVD recorder with STANDBY m or
select the '
time shift buffer will be deleted.
With this function you can record additional TV shows from the same
program number:
The recording will be automatically stopped after the end of
the TV show
With each keypress, also the following TV shows will be
recorded. (On the screen appears'1 program, 2 programs,...)
The recording will be automatically stopped after 30 minutes.
With each keypress, you prolong the switch-off time by 30
minutes
™ System, or change of
' function, all other recordings of the
Most pre-recorded video cassettes or DVDs are copy-protected. If you
try to copy these, the message '
display of the DVD recorder.
•) Switch on the TV set, and if necessary, select the program number for the
DVD recorder.
•) Switch on the DVD recorder.
•) Select recording mode (button TUNER , button SYSTEM
', button C '
MENU , '
1 Connect the video recorder/DVD Player as described in the
chapter 'Connecting additional devices'.
2 Press TUNER to display the picture of the Video recorder/DVD
player on the screen.
3 Use B , A to select the program number of the input jack to
which the Video recorder/DVD player is connected.
(CAM1) VIDEO (CAM1)
4 Switch on the video recorder/DVD player.
In case playback has started automatically, interrupt it with
STOP h or PAUSE 9 .
5 Start recording by pressing REC/OTR n on the DVD recorder
and playback by pressing PLAY G on the video recorder/DVD
player.
a
b
b
b
a
b
6 To stop the recording press and hold the red function button on
the remote control until the red light around the n button is
switched off.
' will appear in the
').
S-VIDEO
DV IN (CAM2)