Philips HDRW 720/17 Owner's Manual page 58

You can mark entire sections or the whole disc for endless playback.
Depending on the type of disc (DVD video, DVD+RW, video CD) you
can select a chapter, title or the entire disc.
1 Select the desired chapter, title or the entire disc and start
playback.
2 During playback, press SELECT . By pressing SELECT again
you can chose from the following options:
•) ' ': repeat chapter (DVD only)
•) ' ': repeat track/title
•) ' ': repeat entire disc (Video CD, Audio CD only)
•) ' ': Shuffle
•) Display disappears: no repeat
3 To end the repeat, press the STOP h button.
You can also keep pressing the SELECT button until the
displays disappear.
You can repeat a particular passage within a title/chapter. You need to
indicate the start and end of the passage.
1 During playback press PAUSE 9 at the start point.
P
You will see a still picture.
2 Keep pressing SELECT until '
P
The start point is now saved.
3
Press PLAY G to start playback.
4 When the end point is reached press OK .
P
' ' appears on the TV screen.
Playback now takes place within these points.
5 To end the repeat, press the STOP h button.
You can also keep pressing the SELECT button until the
displays disappear.
This feature plays back the first 10 seconds of each chapter (DVD) or
track (CD).
1 During playback, press SELECT . Select '
SELECT .
P
After 10 seconds the DVD recorder switches to the next
chapter/index.
To start playback at the relevant chapter/index press
STOP h and then PLAY G .
' appears on the screen.
' using
If a DVD contains scenes that have been shot from different camera
angles you can select these camera angles for playback.
1 During playback, press PAUSE 9 .
P
You will see a still picture.
2 Press SYSTEM MENU and select the '
a
b
3 Select the required camera angle with B or A .
You can also directly enter the number with the number
buttons 0..9 .
P
After a short time, playback will resume from the new camera
angle.
The ' ' symbol will remain visible until a scene starts for
which there is only one camera angle.
The Zoom feature allows you to enlarge the video image and pan
through the enlarged image.
1 During playback, press PAUSE 9 .
P
The DVD recorder switches to 'PAUSE'. You will see a still
picture.
2 Press SYSTEM MENU and select the '
3 Select the required zoom factor using B or A .
P
When '
process is complete.
4 Press OK . Using A , B , C , D select the part of the image
you wish to view.
5 Confirm with OK .
6 To stop the feature, press PLAY G and then SYSTEM MENU .
' icon using C .
' icon using C .
' appears on the screen, the zoom