Philips HDRW 720/17 Owner's Manual page 31

Your DVD Recorder is equipped with the TV Guide On
™
Screen System. The TV Guide On Screen
interactive electronic program guide that lists all the TV programs
available in your area. You can also use the TV Guide On
Screen ™ System to program your DVD recorder to record your
favorite shows.
Press TV GUIDE to see a summary of all the TV programs currently
being shown on the various TV channels. For the summary, you can
either display all shows for a particular start time or sorted according
to category.
For the TV Guide On Screen ™
necessary data has to be collected. The DVD recorder may take up to
several hours to do this.
•) All the TV channels must already have been installed.
•) The TV channel that transmits the TV Guide On Screen
information must not be switched off
•)The time and date must have been set.
•)The antenna/cable network must be connected; it must be possible to
receive TV channels.
•)The DVD recorder must be connected to the AC-outlet
•)The DVD recorder must be switched to standby with the
STANDBY m button.
•) If you have connected a cable box it must be switched on.
Below we'll tell you how to set up the TV Guide On Screen
to suit your own particular needs and how to install a cable box if you
have one.
™
If the TV Guide On Screen System has not yet been set up, go directly
4
to step .
1 Switch on the TV set. If required, select the channel for the DVD
recorder (channel 3 or 4).
2 Press the TV GUIDE button on the remote control.
P
The ' ' screen will appear.
a
b
Installation of the TV Guide On Screen
If you choose this option the 'reminder screen' will appear
every time you switch on the DVD recorder.
Select this option if you do not want to set up the TV Guide
On Screen ™ System now. Please note, that without a complete
installation from the TV Guide On Screen
possible to make a programd recording.
™
System offers a free
System to operate correctly, the
™
system
™
™
System
™ System it is not
3 Press A . Select then '
Use B , A to select
4 Confirm with OK .
A list of countries will appear on the screen.
Use A , B to select your country.
5 Confirm with OK .
6 Enter the zip/postal code where the DVD recorder is being set up.
7 Confirm with OK .
8 Select your type of antenna connection.
9 Confirm with OK .
If you selected '
need to do here. Read on in the section entitled 'Continue set-up'.
Otherwise, you should continue here.
0 Select the type of cable connection.
: External cable box
: Connection to a cable network.
A Confirm with OK .
If you selected '
System
Read on in the section entitled 'Continue set-up'.
Otherwise, you should continue here.
B If you connected the cable box to the DVD recorder only via the
antenna cable, select with B or A the channel number on which
the cable box is transmitting (most channel 3).
If the cable box is connected via the Video/Audio or S-Video jack,
select the relevant input jack of the DVD recorder on the screen.
An incorrect setting here may lead to poor TV reception.
C Confirm with OK .
' with the C or D button.
.
: Antenna
: Cable connection
' ' ', there is nothing further you
', there is nothing further you need to do here.