Philips HDRW 720/17 Owner's Manual page 23

To copy camcorder recordings, you can use the front jacks. These
jacks are behind the door in the lower right corner of the front panel.
Recordings from the front jacks were stored on the HDD to make
editing easy. Then you can transfer (archive) them on a DVD+RW/+R.
If you are using a Digital Video or Digital 8 camcorder, connect the
DV IN (CAM2) IN jack of the DVD Recorder to the corresponding
DV OUT jack on the camcorder.
Choose ' ' as a program number for this input.
If you are using a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO
(CAM1) in jack of the DVD Recorder to the corresponding S-video
out jack on the camcorder.
You must also connect the L AUDIO R (CAM1) in jacks of the DVD
Recorder to the audio out jacks on the camcorder.
Choose ' ' as a program number for this input.
If your camcorder only uses a video output (Composite Video or
CVBS), connect the VIDEO (CAM1) input of the DVD Recorder to
the corresponding output jack on the camcorder.
You must also connect the L AUDIO R (CAM1) in jacks of the DVD
Recorder to the audio out jacks on the camcorder.
Choose ' ' as a program number for this input.
There were two analog audio output jacks AUDIO L/R (OUT
2) (audio signal output left/right) and two audio input jacks AUDIO
L/R (IN-EXT 2) (audio input left/right) on the back of the DVD
Recorder.
These can be used to connect the following devices:
The back of the DVD Recorder features two digital audio output jacks
OPTICAL OUT for an optical cable and COAX OUT for a coaxial
cable (cinch cable).
It can be used to connect the following devices:
a
b