Philips HDRW 720/17 Owner's Manual page 61

Initially, all the chapters are visible. You can hide chapters for playback
(e.g. unwanted scenes) or make them visible again. In editing mode,
hidden chapters are shown darker.
A chapter always consists of a start marker and an end marker.
To hide a certain scene, proceed as follows:
1 Search the beginning of the scene you want to hide. Press
PAUSE 9 .
2 Press EDIT on the remote control to call the '
' editing menu.
3 Set the start marker using OK .
P
The number of chapters ('C') in the menu line will increase by
one.
4 Search for the end of the scene.
You can also use O or N to search faster for the end of
the scene.
Make sure that you do not jump into the next title (title
number 'T' must not change).
Only chapters within a title can be hidden.
5 Press PAUSE 9 at the corresponding position.
6 Set the end marker with OK . This will also be the start marker of
the next chapter.
P
The number of chapters ('C') in the menu line increases by
one.
a
b
T/C
PAUSE 9
7 Press T/C twice to change the chapter number 'C'.
8 Select the previous chapter with B , since you are already in the
next chapter (end of the chapter is also the beginning of the next
chapter).
9 Wait until the chapter has been played and press PAUSE 9 to
stop playback.
0 Select '
' using B or A .
A Using C select '
'.
P
The picture is shown darker.
B To end, press EDIT .
During playback this chapter will be skipped.
If the chapter is not visible, select '
B A
B
OK
SELECT
A
with C .
' in step