Philips HDRW 720/17 Owner's Manual page 36

The basic settings of the TV Guide On Screen
automatically stored after the initial set-up has been completed. You
can change these basic settings here.
Choose the function with B or A and confirm with OK .
Here you can change the basic settings. Choose with B or A the
appropriate answer:
All settings are correct. Nothing should be changed. End with OK .
Read the information on the screen.
Leave the TV Guide On Screen
The basic settings are correct (Zip/Postal code, cable box,...) but there
were more than one channel line ups recognized.
1 Confirm with OK .
2 Choose with B or A the channel line up which fits to your
location. If necessary ask your Cable TV provider.
After the confirmation with OK the TV channels were
automatically adapted.
3 If no channel line up match that from your location, select '
'. After the confirmation with OK you get automatically the
'
in the next chapter.
After the confirmation with OK you will start the setup process of the
TV Guide On Screen ™ System again. Please note that after the
installation is complete it can take up to 24 hours to load the actual
data.
™ System are
System with OK .
™
' screen. Please follow the description
Here you can change the order of the TV channels for the '
screen. Moreover, you can assign the channel numbers to the TV
stations and switch them on or off.
1 Press OK .
A TV station is displayed in two columns.
2 Use the B and A buttons to select the TV station you want to
modify. Use the D and C buttons to switch between tiles.
The TV station logos and call letters are shown here.
The state of the channels and the channel numbers are displayed here.
If a TV station can only be received via an external cable box, select the
jack to which the cable box is connected and the channel number of
the station on the cable box. If you have connected a cable box only
with the antenna cable, enter the channel number of the TV station
that you would normally enter for this station on the cable box.
Please note that if you have changed TV stations it can take up to 24
hours to get the actual data,
3 Use the number buttons 0..9 to enter the channel number of the
TV station.You can only enter valid cannel numbers.
A
Here you can choose with B or A between 'Auto display' 'On' or
'Off'.
On
The TV Guide On Screen
the DVD Recorder is switched on with the
STANDBY m button.
'Off'
You will have to press the button TV GUIDE to access the
TV Guide On Screen ™
0..9
™ system screen appears every time
system.
'
B