Setup; Setup 1:Connect The Video Signal Cables - Sony SDM-X73 Owner's Manual

Setup

Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• Quick Setup Guide
Setup 1:Connect the video signal
cables
• Turn off the monitor and computer before connecting
them.
• When connecting the computer to the monitor's HD15
input connector (analog RGB), refer to "Connect a
computer equipped with an HD15 output connector
(analog RGB)."
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
1 Slide up the back cover.
2 Tilt the display forward.
Connect a computer equipped with a DVI output
connector (digital RGB)
Using the supplied DVI-D video signal cable (digital RGB), connect the
computer to the monitor's DVI-D input connector (digital RGB) for
INPUT2 (SDM-X53) or INPUT3 (SDM-X73/X93).
to the computer's DVI output
connector (digital RGB)
Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD 15 input connector (analog
RGB) for INPUT1 or INPUT2 (SDM-X73/X93).
Connect the computer according to the following illustrations.
x Connecting to an IBM PC/AT or
compatible computer
IBM PC/AT or
compatible computer
to the computer's HD15 output
connector (analog RGB)
IBM PC/AT or compatible
computer
to the DVI-D input
connector (digital RGB)
DVI-D video signal
cable (digital RGB)
(supplied)
to the HD 15 input
connector (analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
(continued)
7
GB