Gear Housing Disassembly; Bearing Carrier - Mercury 5 SERIES Service Manual

GEAR HOUSING
6. Remove bolts with washers.
7. Guide gear housing from drive shaft housing.
a
a

Gear Housing Disassembly

Bearing Carrier

1. Remove two bolts that secures bearing carrier.
Make sure to keep gear housing from falling when bearing carrier loosens.
2. Clamp propeller shaft in soft jaw vise. Use soft face mallet to strike gear housing approxi-
mately midway between anti-ventilation plate and bearing carrier cavity.
a
b
Page 6-10
a
56393
- Bolts with Washers
b
56394
- Bolts (2)
- Bearing Carrier
CAUTION
a
56306
56395
90-857138R1 MAY 2000