Mercury 5 SERIES Service Manual page 58

3. Secure flywheel holder to flywheel with 3 bolts. Loosen flywheel nut until nut is flush with
end of crankshaft. Do not remove nut at this time.
a -
b -
4. Thread flywheel puller into flywheel holder. While holding flywheel, tighten puller against
crankshaft until flywheel loosens. Remove flywheel holder/puller. Remove flywheel nut.
Remove flywheel.
a -
90-857138R1 MAY 2000
91-804552
Flywheel Holder
Bolts (3)
Flywheel Puller
a
b
IGNITION SYSTEM
57521
a
57519
Page 2A-15