Mercury 5 SERIES Service Manual page 241

5. Route throttle cables to carburetor and secure with j-clip.
6. Slide throttle cable ends into throttle drum. Secure throttle drum with bolt.
7. Place end of throttle cable jackets into retaining bracket.
8. With throttle arm of carburetor against idle speed screw, remove slack from throttle
cables with adjustment nuts.
a -
b -
c -
d -
90-857138R1 MAY 2000
a
J-clip
Throttle Drum
Bolt
Adjustment Nuts
TILLER HANDLE
d
c
b
57230
Page 7B-11