Mercury 5 SERIES Service Manual page 137

Quicksilver Lubricants and Service Aids
92-809819
92-809822
92-828000A12
Powerhead - General Information
Powerhead "Disassembly" and "Reassembly" instructions are printed in a sequence that
should be followed to assure best results when removing or replacing powerhead compo-
nents. If complete disassembly is not necessary, start reassembly at point that disassembly
was stopped. Usually, complete disassembly of the entire powerhead will be required.
If major powerhead repairs are to be performed remove powerhead from drive shaft hous-
ing. Powerhead removal is not required for 1) valve adjustment and 2) minor repairs on com-
ponents such as ignition systems or carburetor.
90-857138R1 MAY 2000
Part No.
Loctite 271
Loctite Pipe Sealant w/Teflon-567
4-Cycle Outboard Oil
CYLINDER BLOCK AND CRANKCASE
Description
Page 4B–5