Mercury 5 SERIES Service Manual page 81

FUEL PUMP & INTREGAL FUEL TANK
Fuel Pump Removal and Installation
REMOVAL
1. Remove the fuel hoses from the fuel pump.
2. Remove the two mounting screws and remove the fuel pump.
INSTALLATION
1. Place O-ring seal on the back side of the fuel pump and install the pump. Tighten screws
to the specified torque.
2. Reconnect the fuel hoses and secure fuel hoses with hose clamps.
Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å Å
110 4-Stroke Outboard Oil (92-828000A12)
a -
b -
c -
d -
e -
Page 3A-4
Fuel Pump Mounting Screws
a
Fuel Pump
O-Ring
Outlet Fuel Hose
Inlet Fuel Hose
Hose Clamps (2)
f - Screws (2) M6 x 25 mm
70 lb-in. (8 Nm)
c
e
f
e
d
110
Back View
b
90-857138R1 MAY 2000