Cleaning Agent; Replenishing Liquid Cleaning Agent - Miele PG8582 CD Operating Instructions Manual

Adding and dispensing chemical agents
Replenishing
liquid cleaning
agent
60

Cleaning agent

 Use only cleaning agent which is suitable for washer-
disinfectors.
Do not use cleaning agents for domestic dishwashers.
The washer-disinfector is designed exclusively for use with liquid
cleaning agent. The liquid cleaning agent is dispensed from an
external supply container via a siphon.
For environmental reasons it is important to always consider the
following factors when selecting a cleaning agent:
– How alkaline does the cleaning agent need to be for the cleaning
application involved?
– Are protein-removing enzymes required and is the programme
sequence suitable for this?
– Are tensides required for proper dispersal and emulsification?
– A suitable, mildly alkaline, active chlorine-free cleaning agent
should be used for thermal disinfection programmes.
For cleaning specific types of soiling, and for information on the
optimum cleaning agents and additives to use for liquid dispensing,
please contact Miele Service.
Open the drawer in the side unit.

Remove the liquid cleaning agent container (blue marking) and

place it on the open cabinet door or on a surface which is robust
and easy to clean.
Unscrew and remove the siphon. Place the siphon on the open

cabinet door.
Replace the empty container with a full one.

Push the siphon into the opening of the container and screw it back

on tightly. Observe the colour coding.
Wipe up any spilled chemical agent thoroughly.

Place the container back in the drawer in the side cabinet.
