REAR SHOCK ABSORBER AND SWINGARM
SWINGARM INSPECTION
1.Inspect:
Swingarm
Bends/cracks/damage → Replace.
2.Inspect:
Bushings 1
Wear/damage → Replace.
RUBBER BOOT INSPECTION
1.Inspect:
Rubber boot 1
Damage → Replace.
RUBBER BOOT INSTALLATION
1.Apply:
Adhesive (for rubber)
(to the engine 1)
2.Install:
Rubber boot 2
NOTE:
Be sure to position the rubber boot so that
the tang 3 faces towards the left.
8 - 46
CHAS