Show Access-List (Ipv4 Hardware Acls) - Allied Telesis AT-x230-10GP User Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- (IP 4 H
SHOW ACCESS LIST V ARDWARE

show access-list (IPv4 Hardware ACLs)

Overview Use this command to display the specified access-list, or all access-lists if none have
been specified. Note that only defined access-lists are displayed. An error message
is displayed for an undefined access-list.
show access-list
Syntax
[<1-99>|<100-199>|<1300-1999>|<2000-2699>|<3000-3699>|<4000-44
99>|<access-list-name>]
Mode User Exec and Privileged Exec
Examples To show all access-lists configured on the switch:
awplus#
To show the access-list with an ID of 20:
awplus#
Note the below error message if you attempt to show an undefined access-list:
awplus#
C613-50104-01 REV A
L (ACL) C
IST OMMANDS
ACL )
S
Parameter
<1-99>
<1300-1999>
<3000-3699>
<4000-4499>
<access-list-name>
show access-list
Standard IP access list 1
deny 172.16.2.0, wildcard bits 0.0.0.255
Standard IP access list 20
deny 192.168.10.0, wildcard bits 0.0.0.255
deny 192.168.12.0, wildcard bits 0.0.0.255
Hardware IP access list 3001
permit ip 192.168.20.0 255.255.255.0 any
Hardware IP access list 3020
permit tcp any 192.0.2.0/24
awplus#show access-list 20
show access-list 20
Standard IP access-list 20
deny 192.168.10.0, wildcard bits 0.0.0.255
deny 192.168.12.0, wildcard bits 0.0.0.255
show access-list 2
% Can't find access-list 2
Command Reference for x230 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IP standard access-list.
IP standard access-list (standard - expanded range).
Hardware IP access-list.
Hardware MAC access-list.
IP named access-list.
875