Configuration Under Webconfig; The Security Checklist - Lancom l-54ag User Manual

LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Mark your LANCOM 54 Wireless in the selection window. Select from the
command bar Extras
Select in the selection menu the setup wizard Configuring Firewall and
confirm your choice with Next.
In the following windows, select the services/protocols the rule should be
related to. Then you define the source and destination stations for this rule
and what actions will be executed when the rule will apply to a data
packet.
You finally give a name to the new rule, activate it and define, whether
further rules should be observed when the rule will apply to a data packet.
The wizard will inform you as soon as the entries are complete. Complete
the configuration with Finish.
5.3.2

Configuration under WEBconfig

Under WEBconfig it is possible to check and modify all parameters related to
the protection of the Internet access under Configuration
Rules
5.4

The security checklist

In the following checklist you will find an overview of the most important
security functions. That way you can be quite sure not to have overlooked any-
thing important during the security configuration of your LANCOM.
Have you assigned a password for the configuration?
The simplest option for the protection of the configuration is the estab-
lishment of a password. As long as a password hasn't been set, anyone
can change the configuration of the device. The box for entering the pass-
word is located in LANconfig in the 'Management' configuration area on
Setup Wizard.
Rule Table.
Chapter 5: Security settings
Firewall / QoS
47