Lancom l-54ag User Manual page 32

LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Chapter 3: Basic configuration
Starting the wizards in WEBconfig
32
If there is no DNS server in the LAN, or it is not linked to the DHCP server,
then the device can not be reached by the name. The following options
remain in this case:
Figure out the DHCP-assigned IP address of the LANCOM by suitable
tools and contact the device directly with this IP address.
Use LANconfig.
Connect a PC with a terminal program via the serial configuration
interface to the device.
Start your web browser (e.g. Internet Explorer, Netscape Navigator,
Opera) and call the LANCOM 54 Wireless there:
http://<IP address of the LANCOM>
(or with a name as discribed above)
If you cannot access an unconfigured LANCOM 54 Wireless, the prob-
lem may be due to the netmask of the LAN: with less than 254 possi-
ble hosts (netmask > '255.255.255.0'), please ensure that the IP
address 'x.x.x.254' is located in your own subnet.
The WEBconfig main menu will be displayed: