Lancom Iap-54 Wireless - Lancom l-54ag User Manual

LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
2.4.2

LANCOM IAP-54 Wireless

Wall mounting
Wall mounting
Pole mounting
Operational? – After a short device self-test the Power LED will be per-
manently lit green resp. will blink alternately red and green as long as no
configuration password has been given.
Fit the wall-mounting bracket
·
screws to the reverse side of the housing.
Mount your LANCOM IAP-54 Wireless on the wall with suitable fixing
»
screws/bolts in the location. The wall-mounting screws are not sup-
plied as standard.
³
³
Place the hose clip
the pole-mounting bracket ·. Two hose clips for posts of differing diam-
eter are supplied as standard.
Fix the pole-mounting bracket
to the reverse size of the housing.
Finally, mount your LANCOM IAP-54 Wireless with the hose clip
position required on the post.
³
with the help of the two M6 hexagonal
·
that is best suited to the size of your pole around
·
with the two M6 hexagonal screws
Chapter 2: Installation
»
»
³
in the
21