Hardware Installation; Lancom L-54G Wireless, Lancom L-54Ag Wireless - Lancom l-54ag User Manual

Hide thumbs Also See for l-54ag:
Table of Contents

Advertisement

LANCOM L- 54ag Wireless – LANCOM L- 54g Wireless – LANCOM IAP- 54 Wireless
Note that resetting the device leads to a loss on the WLAN encryption
settings within the device and that the default WEP key is active again
('Standard WEP encryption' →page 43).
2.4

Hardware installation

2.4.1

LANCOM L-54g Wireless, LANCOM L-54ag Wireless

The installation of the LANCOM 54 Wireless base station takes place in max-
imum five steps:
Antennas – Screw on the both included diversity antennas at the back of
the LANCOM 54 Wireless base station.
LAN – You can first connect the LANCOM 54 Wireless base station to your
LAN. For that purpose, plug the included network cable (green plugs) into
the LAN connector of the device
connecting socket of your local network (resp. into a free socket of a hub/
switch). In this case, the node/hub switch
'node' ( ).
Alternatively, you can connect also a single PC. In this case, turn the node/
hub switch
The LAN connector identifies automatically the transfer rate (10/100
Mbps) of the connected network device (autosensing).
For information about the installation of PoE see the info box 'Power-
over-Ethernet – elegant power supply through the LAN wiring'
→page 17.
DSLoL – If you want to use your LANCOM 54 Wireless base station in
DSLoL mode, you can either connect the device directly to the DSL modem
(exclusive mode) or to a hub resp. switch of the cable-bound LAN (auto-
matic mode).
For the exclusive mode insert the included network cable (green plugs)
into the LAN connector of the device
responding interface of the DSL modem. In this case, turn the node/hub
switch
For the automatic mode for simultaneous operating with LAN and DSLoL
insert the included network cable (green plugs) into the LAN connector of
the device
on 'hub' ( ).
on 'hub' ( ).
and the other end into a free network connecting socket of
Chapter 2: Installation
and the other end into a free network
remains in the presetting
and the other end into the cor-
19

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the l-54ag and is the answer not in the manual?

This manual is also suitable for:

L-54gIap-54

Table of Contents