GAUGE DIVE ALT
This screen simply tells you the max current time of day and ambient temperature.
RUN TIMER
The Run Timer is started and stopped by pressing the Select button. It can be reset by holding Mode and Ad-
vance buttons together.
DELAYED VIOLATION 3 (DV3)
If you descend deeper than the maximum functional depth*, the audible alarm will sound. At the same time, the
GO UP TOO DEEP message with up arrows will flash and depth will only indicate dashes signifying that you are
too deep. The max depth on the Alt screen will also be represented by dashes.
* The maximum functional depth (Dive/Gauge/Free = 100 m/330 ft330) is the depth at which the i750TC can properly perform calculations or
provide accurate display information.
Upon ascending above the maximum functional depth, current depth will be restored, however, max depth will
continue to be displayed as dashes for the remainder of that dive. The Log for that dive will also display dashes
for max depth.
© Aqua Lung International, Inc. (2016)
Run Timer, 0:00 up to 9:59 (min:sec),
then 0:10 to 9:59 (hr:min)
flashing
51
GAUGE MODE
Doc. 12-7852-r05 (8/5/16)