Philips M3860A Instructions For Use Manual page 75

category
Battery Type
Capacity
Status Indicators
Storage Temperature
Standby Life
(after installation)
category
Application
Power Requirements
Environmental
Requirements
Conformance Testing
category
Pads, Cable, and Connector
(Optional) M3848A FR2+ rechargeable battery
11.3 VDC, 6.5 Ah, lithium ion. Rechargeable cell using the M3849A charger.
When freshly charged and used at 77° F (25° C) , provides a minimum of 80
(typically 100) shocks, or 3.5 hours (typically 5 hours) of ECG display time only,
before recharging is indicated.
Good battery: bar graph on display screen indicating remaining power level.
Low battery: flashing red X on the front panel of the FR2+ (When low battery
indicator appears, there is still enough energy to deliver 9 shocks plus 15 minutes
of ECG display time).
Dead battery: solid red X on the front panel of the FR2+.
32° to 109° F (0° to 43° C).
6 months when installed fully charged in a defibrillator labeled FR2+.
(Optional) M3849A charger
nominal specifications
For use with M3848A FR2+ rechargeable battery only.
100 to 240 VAC, 47 to 63 Hz, 30 Watts
32° to 122° F (0° to 50° C).
0% to 95% relative humidity (non-condensing).
International: EN60335-1:1994 Class 1
North America: UL 1310 Class 2
M3870A and DP2/DP6 defibrillator pads
nominal specifications
Disposable and self-adhesive. DP2/DP6 adult defibrillator pads have a nominal
active surface area of 100 cm
integrated 122 cm (48 inch), typical, cable and connector. M3870A FR2
infant/child reduced-energy defibrillator pads have a nominal active surface area of
2
44 cm each and are provided in a sealed package with an integrated 122 cm (48
inch), typical, cable and connector incorporating attenuating electronics.
nominal specifications
2
each and are provided in a sealed package with an
Te ch n ic al S p ec if i ca ti o n s
B-7
B