Philips M3860A Instructions For Use Manual page 34

4-8
feature
speaker
lights
option buttons
display screen
shock button
M3860A/M3861A HEARTSTART FR2+
The following table describes the parts of the FR2+ tested in the interactive
part of the selftest and any action you are asked to take.
Screen prompt:
CHECK SPEAKER SOUND
> Listen for the two beeps from the speaker.
Screen prompt:
CHECK SHOCK BUTTON LIGHT AND PADS CONNECTOR LIGHT
> Check that the lights come on.
Screen prompt:
PRESS THE OPTION BUTTONS
> Press the blue upper and lower Option buttons and listen for a beep to
confirm each press. Look at the screen to be sure the button presses
have been verified.
Screen prompt:
CHECK DISPLAY
> Check the test pattern displayed on the screen. Adjust the contrast if
desired using the Option buttons.
:
Screen contrast can be adjusted at any time during the interactive
N O T E
selftest by repeatedly pressing the appropriate Option button until
desired contrast is achieved.
Screen prompt:
PRESS THE SHOCK BUTTON
> Press the Shock button and listen for a beep to confirm the press.
No shock will be delivered when you press the Shock button during the
test.
> Look at the screen to be sure the button press has been verified.
test description
(2 beeps)
.
ADJUST CONTRAST IF NEEDED