Quick Release Axles - progeo JOKER EVOLUTION User Manual

Check the tyre pressures weekly using "table 1" as a
guide.
Incorrect inflation of the tyres (especially if too low)
causes incorrect functioning of the brakes and the
wheelchair may not stop (see chapter 6.8 "Brake
adjustment").
A correct tyre pressure makes the wheelchair much
more fluent and easier to move and control
Fig. 12
Table 1 Rear Wheel Tyre Pressure
TYRE
High Pressure
High pressure profile
Marathon Plus
Anti puncture
2.7

Quick release axles

After each procedure carried out on the rear wheels, ensure that
the quick release axles are well inserted (see fig.13) (see chapter
5.5 "Quick release rear wheels).
To inflate the tyres always use a compressor with a
gauge.
Do not use hand pumps or other systems.
Do not exceed the pressure indicated in the pressure
table as the inner tube or the tyre may get damaged.
Pay particular attention to type of tyre fitted, as
shown in "table 1".
PRESSURE
7 BAR
7 BAR
10 BAR
Does not require inflation
The anti puncture tyres does not require
type of tyre needs less maintenance and eliminates the
costs and inconvenience due to repair or replacement of
the inner tube.
However, during normal use, they are less fluent than
traditional tyres or tubulars
A check up of the quick release axles is a periodic
procedure the user should carry out .
JOKER EVOLUTION 13
inflation. This