Table of Contents
Advertisement
3) Input your local UTC time through the setup menu.
1. Press and hold the
DIAL knob.
2. Press the
ENT
with the DIAL knob.
3. Press the
ENT
with the DIAL knob.
4. Press the
ENT
Date ( 20YY / MM / DD )" with the DIAL knob.
6. Press the
ENT
7. Enter the current date (yr/mo/day) from the
keypad.
8. If a mistake was made entering repeat pressing
the
key until the wrong number is selected,
H/L
then enter the correct number.
9. Using the Standard time table above, calculate
the UTC time of your position.
Note: For daylight savings time subtract one hour
to the offset in your time zone.
10. To enter the time, press the
the display, then enter the time from the keypad.
11. Press and hold down the
selected setting.
Update " with the DIAL knob, then press
the
key.
ENT
13. Turn the DIAL knob to select the method of
Manual ."
14. Press the
ENT
15. To exit this menu and return to radio operation
mode press the
GX5500S
key
CALL
Radio Setup " with the
key.
key.
Time ( hh / mm [UTC] )" is selected on
key to store the selected setting.
key.
16/9
Setup Menu "
Calendar "
Calendar "
ENT
key to store the
ENT
Automatic " and
-Setup Menu-
Radio Setup
DSC Setup
QUIT
SELECT
[CLR]
[ENT]
-Radio Setup-
CH Name
Unit Name
Tone Control
FOG Frequency
Calendar
SELECT
QUIT
[CLR]
[ENT]
-Calendar-
Calendar
Update
SELECT
QUIT
[CLR]
[ENT]
-Date-
Date (YYYY/MM/DD)
20--/--/--
Time (hh:mm)[UTC]
--:--
QUIT
SET
[CLR]
[ENT]
-Date-
Date (YYYY/MM/DD)
2013/01/01
Time (hh:mm)[UTC]
--:--
QUIT
SET
[CLR]
[ENT]
-Date-
Date (YYYY/MM/DD)
2013/01/01
Time (hh:mm)[UTC]
10:00
QUIT
SET
[CLR]
[ENT]
-Calendar-
Calendar
Update
QUIT
SELECT
[CLR]
[ENT]
-Date Update-
Automatic
Manual
QUIT
SELECT
[CLR]
[ENT]
Page 91
Advertisement
Table of Contents
