Standard Horizon QUANTUM GX5500S Owner's Manual page 62

9.6.2.2 Group Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact a group of vessels with-
out storing the MMSI in the group call directory.
1. Press the
appear.
2. Rotate the DIAL
cancel, press the
3. Press the
ENT
appear.
4. Rotate the DIAL
and press the
5. Press an appropriate number key on the
keypad to select the second number of the
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI
number, repeat pressing the
the wrong digit is selected, then press an
appropriate number key to correct the entry.
8. When finished entering the MMSI number,
press and hold the
9. Rotate the DIAL knob to select the operat-
ing channel you want to communicate on,
then press the
10. Press the
ENT
signal.
11. After the group call is transmitted, all the
radios in the group will switch to the desig-
nated channel.
12. Listen to the channel to make sure it is not busy, then press the micro-
phone's PTT switch and talk into the microphone to the group of vessels.
Page 62
D S C M e n u " will
CALL
key.)
CLR
key. The group directory will
key.
ENT
key.
ENT
key.
ENT
key to transmit the group call
Individual
Group
All Ships
POS Request
Group ". (To
POS Report
QUIT
[CLR]
"
Manual
Input Group
ID:0--------
QUIT
[CLR]
-Select Intership CH-
06
0
09
10
13
key until
H/L
QUIT
[CLR]
-DSC Menu-
-Group Call-
SELECT
Manual
[ENT]
Horizon
YAESU
Fisher
USCG
QUIT SELECT
[CLR] [ENT]
-Group Call-
SELECT
[ENT]
-Group Call-
Input Group
ID:034567 91
QUIT SELECT
[CLR] [ENT]
SELECT
[ENT]
-Group Call-
Name:
ID:034567 91
Category:Routine
CH: 06
Transmit?
QUIT
[CLR] [ENT]
-Group Call-
Name:
ID:034567 91
CH: 06
Transmitting
-Group Call-
Name:
ID:034567 91
CH: 06
Since:01:03
QUIT
[CLR]
GX5500S
YES