Table of Contents
Advertisement
4. Press the
ENT
DIAL knob.
5. Press the
ENT
6. Press an appropriate key on the keypad to
you want to reference in the directory.
7. Press the
ENT
the name and step to the next letter to the
right.
8. Repeat step 6 and 7 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters press the
to the next space. This method can also be
used to enter a blank space in the name.
If a mistake was made entering in the name repeat pressing the
until the wrong character is selected, then press an appropriate key to
correct the entry.
9. After the eleventh letter or a space has been entered, press and hold
the
key to advance to the group MMSI number entry.
ENT
10. Press an appropriate number key on the
keypad to select the second digit of the
this procedure until all eight digits of the
MMSI number are entered.
11. If a mistake was made entering in the MMSI
number repeat pressing the
the wrong digit is selected, then press an
appropriate number key to correct the entry.
12. To store the data entered, press and hold the
13. To enter another group address, repeat steps 5 through 12.
14. Press the
CLR
Page 60
key.
ENT
key three times to return to radio operation.
Add " with the
key to move
key until
H/L
ENT
-Group Directory-
Add
Edit
Delete
SELECT
QUIT
[CLR]
[ENT]
-Group Directory-
Group Name
_
MMSI No.
0--------
QUIT
SET
[CLR]
[ENT]
-Group Directory-
Group Name
Horizon
MMSI No.
0--------
QUIT
SET
[CLR]
[ENT]
-Group Directory-
Group Name
Horizon
MMSI No.
02-------
QUIT
SET
[CLR]
[ENT]
-Group Directory-
Group Name
Horizon
MMSI No.
0234567 9
QUIT
SET
[CLR]
[ENT]
key.
GX5500S
key
H/L
Advertisement
Table of Contents
